Firmware Update Guide for Ikon EEG Amplifiers
Overview of the firmware update process and key requirements to ensure a successful upgrade
Download the Complete Guide
This article provides a high-level overview of the firmware update process for Ikon EEG amplifiers.
To ensure a correct and successful update, please carefully follow the complete step-by-step instructions available in the official guide: Download the Ikon EEG Amplifier Firmware Update Guide
Requirements
- Before starting: Ensure your amplifier has sufficient battery
- Use the correct firmware file (ZIP format, not extracted)
The firmware package is provided by the Bitbrain Technical Support Team as a ZIP file. To obtain it, please contact [email protected] with details of your current hardware and firmware versions.
- You can check your current firmware version as well using SennsLite in this Help Center article: How to identify the firmware version of your Ikon EEG amplifier
Update process summary
The firmware update is performed through a dedicated web application and follows these general steps:
- Access the firmware update tool
- Power on and connect your amplifier
- Select your device and corresponding firmware ZIP file
- Run the update process
- Wait for completion without interrupting the procedure
During the update, it is essential not to close the browser, refresh the page, or power off the device, as this may interrupt the process
Once the process is completed, you should verify that the firmware has been successfully installed by checking the version reported in the application. The installed version must match the one provided in the ZIP file.
Need help?
If you have any questions or encounter any issues during the update process, please do not hesitate to contact our support team at: [email protected].